• Clean the dent with a clean wet cloth.

 

  • Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes.

 

  • Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).

 

  • Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).

 

  • Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter).

 

  • Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.

 

  • Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.

 

  • Clean the repaired place with a clean wet cloth.

 

Specification:

  • Material: Carbon steel.
  • Size: 50CM.
  • Standard: Car dent repair tool.

 

Car Dent Repair Kit

$175.98 Regular Price
$87.99Sale Price

    Store Location

    2093 Philadelphia Pike #5002 Claymont, Delaware 19703
    support@shopenzer.com

    804-805-5005

    Customer Support

    Contact Us

    About Us

    Shopenzer Gadgets

    We accept the following paying methods

    Visa.png
    Diners.png
    Discover.png
    PayPal.png